23) can be used.
Special focusing situations The camera may not be able to focus in the following situations.
The arrow on the rear lens cap must be aligned to the lens mounting index.
1 2 3 Pass the tip of the strap through the camera's strap eyelet from below and then the holder ring (1).If the date blinks on the data panel when the camera is turned on, the clock and calendar reset.Replace the lens cap when the product is not being used.The subject must be within the flash range specified in the table below to be correctly exposed.12) Manual-rewind button (p.96 Pages - Size: 13 MB -.00 USD - Minolta XE/XE-1/XE-7 Service Manual.1 Turn the control dial (1) to select the date and time registers; the selected 3d car games mac register blinks.However, functions set in this mode will not reset when the camera is turned off.The flash unit discharges a large amount of energy which may cause burns.
Press and hold the flash-mode button while pressing the shutterrelease button to make the exposure; the flash pops up automatically.
Your donation will help others as well, as all donations go directly to keeping this site running.
58) Spot focus area (p.
Turn the function dial to the drivemode position (1).
51, 52) Shutter-release button (p.Thank you for purchasing a Minolta camera.53) and bracketing (p.Function button Function dial (p.It is a broad and disciplined field that can take years to master.To cancel the flash, push the flash head down.If the focus signal blinks, repeat the procedure.