There are two adjusting ways prepared in this Mode, Manual and Auto.
I/S cover INK tube replacement 1 Turn on the SUB power SW and perform the pump UP from system 32 run dll the INK control menu.
It must be done dewalt 12 inch compound miter saw manual when you remove or replace the cap unit and replace and adjust the carriage unit.
Servo board You don't have to take off the chassis from the machine.
Each parameter can be cleared when the enter key is pressed while the clear is displayed in the menu.If it is not set properly, the printing image becomes light or dark or blurred.Windows PC (OS Windows2000/XP) * Network port is required.Other Cleaning Tasks * Body * Platen * Grit rollers * Pinch rollers (Raise the Pinch rollers when not in use.) * Front cover * Media Clamps Explain the cleaning method for each part to the customer referring to the Users Manual.
Encoder scale spring high-definition audio hda modem installer and driver encoder plate plate 6 Remove the spring plate from the encoder scale and fix it to the new encoder scale where there is no black dot written.
Information necessary for service activity will be printed together with the system report.
7.64 MB back to top, firmware.
Service menu force adjust 4-47 4 Put the white dummy PEN (ST-006) on the tool white dummy PEN carriage.Replacement Grease : floil G902 Replacement Grease : floil G902 Cleaning Replacement Replacement Replacement Backlash Backlash Tension Cleaning Cleaning Cleaning Cleaning Cleaning Cleaning Cleaning Loose Loose NG (Reason) Lubrication Lubrication Replacement Cutting OK NG (Reason) System Report Output/ Taking with Peck.When there is any key that has not been pressed, the name of the key will be indicated with the beep sound.Effect OF violation Regardless of circumstances, we will vigorously respond to any violation hereof, through legal action.Handle all sensitive components in a static-safe area.4 Wiper wears out Wiper Replacement 3-2 wiper replacement 5 Foreign substances Manual Cleaning Users Manual 6 Pump tube is clogged Pump Replacement 3-6 pump replacement 7 Ink Damper is clogged Replace Ink Damper 8 Ink cartridge is almost empty Replace Ink Cartridge 9 Head.