What to do if the usb xp driver update jbexercise Command Fails If the jbexercise command fails, review the suggestions presented in following list to identify potential problems and their solutions.
The ATX power supply in the Computer Core is faulty.
The jukebox cannot load and unload the backup volumes due to mechanical problems.The jbexercise program prompts you for a no-rewind device name.Single-Ended scsi busses are 220 tie fighter no cd patch ohms to 5VDC, 330 ohms to ground.Put the jukebox into normal operating mode.The connection has become loose between the installed line (jack) and the router.
For more information on Technical Support, see "Required Information for Technical Support" on page.
There are three areas where things can go wrong with a jukebox.
Check Drive Door If the sensor that verifies whether the tape drive door is open or closed is out of place, follow the instructions provided with your autochanger hardware to determine the problem, or contact your hardware vendor.
The table below provides you with the command to locate the version of the jukebox driver you are using.The LCD screen stays dark when the jukebox is powered up.Issue the command from any directory.The motherboard in the Computer Core has failed.If these tests most popular ps1 games fail, the tape drive is not functional.Manual Description # of Pages, r-409, singing Towers, service Parts Manual.If the Computer Core does not boot up, perform a complete Power Down and Power.